ems4.TLOG
Module for saving signal data of automation systems
The ems4.TLOG is a storage module. It is used for saving signal data of a DIGICONTROL automation system and enables long-term logging of up to 54 different signals.
- Voltage:24 V DC +/- 10 %
- Power consumption:Max. 3 W
- Mounting:DIN rail mounting
- Housing:
- Housing for use in distribution boards in accordance with DIN 43880
- Housing for use in distribution boards in accordance with DIN 43880
- Dimensions:53,6 x 99,7 x 62,2 mm
- Weight:120 g
- Protection class:IP20
- Operating temperature:+5...+45 °C
- Ambient humidity:Up to 85 % rh. without condensation acc. to VDE 0160, EN 50178, Class 3K3
- Standards / rules / guidelines / approvals:See EU Declaration of Conformity
- Button:Front: 1x for CAN bus configuration
- LED display:
- CAN bus activity: (red /green) (front of device)
- LED1 (green) USB stick has been detected
- LED2 (yellow) data logging
- LED3 (green) SD card has been detected
- LED4 (red) fault, data logging not
- System bus:CAN bus
- Interfaces:
- LIN bus
- USB 2.0 for memory stick (Format: FAT32, max. Size: 32 GByte)
- SD card interface (Format: FAT32, max. Size: 32 GByte)
Type
Description
ems4.HBUS-53
Mounting rail bus connector H bus 53.6
