ems4.RF01E

Communication interface for the integration in existing DIGICONTROL systems

The DIGICONTROL Retrofit module ems4.RF01E enables the connection of ems automation stations to older types of input / output cards (I/O cards) in existing plants. Therefore, older types of existing automation systems can be modernised easily and cost-efficiently. If there are new or extended requirements on the systems of the technical equipment of a building, usually the automation system must be extended as well. Although the hardware of the automation station is still in good condition, the complete automation system will be replaced as the existing automation system cannot be extended in a way to meet the requirements or it is not available anymore. The module ems4.RF01E enables the extension, refurbishment, and repair of existing DIGICONTROL automation stations of the types PCD1 / PCD2 / PCD4 / PCD1.NT while still using the existing I/O automation hardware. Only the CPU module will be replaced by a combination of an ems CPU and the Retrofit module. The control of the switchgear cabinet will be kept.

  • Voltage:
    24 V DC +/- 10 %
  • Power consumption:
    max. 5 W
  • Mounting:
    DIN rail mounting
  • Housing:
    Housing for use in distribution boards in accordance with DIN 43880
  • Dimensions:
    53,6 x 99,7 x 62,2 mm
  • Weight:
    105 g
  • Protection class:
    IP20
  • Operating temperature:
    +5...+45 °C
  • Ambient humidity:
    Up to 85 % rh. without condensation acc. to VDE 0160, EN 50178, Class 3K3
  • Standards / rules / guidelines / approvals:
    See EU Declaration of Conformity

  • Button:
    Front: 1x for CAN bus configuration
  • LED display:
    • I/O-Bus: 1x send (green) 1x receipt (yellow)
    • CAN bus activity: (red /green) (front of device)
  • System bus:
    CAN bus
  • Interfaces:
    • I/O bus
    • LIN bus

Type
Description
ems4.VK_RF01E_1

The cable ems4.VK_RF01E_1 is used as connection cable between the Retrofit module ems4.RF01E and an older type of a DIGICONTROL-CPU.
Cable length 0.5 m; completely pre-assembled

ems4.VK_RF01E_2

The cable ems4.VK_RF01E_2 is used as connection cable between the Retrofit module ems4.RF01E and an older type of a DIGICONTROL-CPU.
Cable length 2.0 m; completely pre-assembled

← Back to product search

Not found the right one yet?