ems4.KNX1E
Communication interface for the integration of KNX / EIB
The ems4.KNX1E module serves as a bi-directional gateway between the ems2 / ems4 / ems5 automation station and the KNX/EIB instabus. The webCADpro configuration tool is used to define all available KNX/EIB objects with respect to the address. The data types of the KNX/EIB objects are also determined here. The user can select between many different data types of the two standrads, EIB interworking and KNX data point. In polling mode, a data refresh method can be set for the actual values. Two options are available here “Update according to system type” and “Cyclical polling”. Upon request, setpoints can be resent to the EIB/KNX object.
- Voltage:24 V DC +/- 10 %
- Power consumption:1 W
- Electrical connection:Via screw terminals for wires up to 1.5 mm²
- Mounting:On vertical surfaces (wall mounting, terminals at top and bottom)
- Housing:Housing for use in distribution boards in accordance with DIN 43880
- Dimensions:71.6 x 109.7 x 62.6 mm
- Weight:120 g
- Protection class:IP20
- Operating temperature:+5...+45 °C
- Ambient humidity:Up to 85 % rh. without condensation acc. to VDE 0160, EN 50178, Class 3K3
- Standards / rules / guidelines / approvals:See EU Declaration of Conformity
- LED display:1x Duo LED (operation and CAN bus: green / error: red)
- System bus:CAN bus
- Interfaces:
- LIN, CAN, KNX
- EIB/KNX-Objects: 256
- Standards: EIB Interworking Standard (EIS) / KNX Datapoint Type (DPT)
Type
Description
ems4.HBUS-71
Mounting rail bus connector H bus 71.6
