ems4.AAH3E
Analogue output module with 4 analogue outputs 0...10 V DC
with integrated LOD
DIN rail mounting
Output modules with local override combine electrical outputs with the possibility of manual intervention. They are designed for installation in a control cabinet (top hat rail). ems4.AAH3E is a module for the output of analogue voltages 4x 0...10 V DC with additional local override. It services as an extension module for automation equipment of the DIGICONTROL ems series. The module`s software enables the processing of all signals in automatic and manual mode. furthermore, addtional funcitons (e.g. value adjustment, command execution control, …) are performed by the module software.
- Voltage:24 V DC +/- 10 %
- Power consumption:1.5 W (maximum load of analogue outputs)
- Electrical connection:Via screw terminals for wires up to 1.5 mm²
- Mounting:DIN rail mounting
- Housing:Plastic housing
- Dimensions:71.6 x 109.7 x 62.6 mm
- Weight:140 g
- Protection class:IP20
- Operating temperature:+5...+45 °C
- Ambient humidity:Up to 85 % rh. without condensation acc. to VDE 0160, EN 50178, Class 3K3
- Standards / rules / guidelines / approvals:See EU Declaration of Conformity
- Inputs:
- 4x analogue outputs 0...10 V DC for connection to feedback message
- Feedback optionally via analogue input or direct use of the output signal (configurable)
- Configurable value indication of the feedback can be adjusted to the output signal via tolerance specification
- Programmable command execution control
- Outputs:
- 4x analogue outputs 0...10 V DC, maximum output
- resolution 10 Bit
- LED display:
- CAN bus activity: (red/green)
- Signaling of the analog voltage via 4 LEDs (from serial number 1543000001)
- System bus:CAN bus
- Interfaces:CAN
Type
Description
ems4.HBUS-71
Mounting rail bus connector H bus 71.6
