ems5.CP05E
Expandable automation station
BACnet Building Controller (B-BC), BACnet/IP, BACnet MS/TP, BACnet/SC
AMEV profile AS-B
DIGICONTROL ems5.CP05E is a network-based, freely configurable automation station for the implementation of manifold tasks in all areas of building and room automation. The ems5.CP05E is perfectly suited to meet all requirements of the future due to its open communicatíon via all modern transmission channels, the utilisation of existing IT structures, the integration of different trades and systems and the extendable overall concept with a centralised and descentralised distribution of tasks by means of intelligent extension modules. Being a compact automation station it is used as expandable system in smaller plants and is applied in complex building and room automation systems. The ems5.CP05E is furnished with an embedded Web server for fully graphics-based remote control and monitoring of the automation functions. A fully graphical visualization of the plant information is supported as well. The ems5.CP05E can be used as BACnet® Building Controller (BBC) pursuant to the BACnet® Standardized Device Profile in accordance with the Annex L of the ANSI ASHRAE Standard 135- 2001 or DIN EN 16484-5. The communication is performed via BACnet/IP, BACnet MS/TP or BACnet/SC.
- Voltage:24 V DC +/- 10 %
- Power consumption:5 W
- Electrical connection:Via screw terminals for wires up to 2.5 mm²
- Housing:DIN rail housing for electrical subdistribution
- Dimensions:162 x 90 x 62 mm
- Protection class:IP20 acc. DIN 40050
- Operating temperature:+5...+45 °C
- Ambient humidity:Up to 85 % rh. without condensation acc. to VDE 0160, EN 50178, Class 3K3
- Standards / rules / guidelines / approvals:See EU Declaration of Conformity
- Inputs:
- 14 universal inputs, freely configurable as:
- PT/NI1000, resolution 12 bit
- 24V DC digital inputs
- 0...10 V DC, resolution 12 bit
- Outputs:
- 4 analogue outputs 0...10V DC
- 10 Bit, 3 mA
- 6 digital relay outputs 230V AC / 6A / no-contact
- 10 million mechanical switching games
- Service:Operation via integrated web server
- LED display:24 V-LED (green), RUN-LED (green), ST-LED (red), RS232/RS485 TX (green), RX (orange), SD card DUO-LED
- System bus:CAN bus
- Interfaces:
- 2x ethernet interfaces 10/100 Mbit via integrated switch at the RJ45 sockets
- 1x RS232/485
- 1x CAN bus
- 1x SD card interface
- Microprocessor system:
- CPU: ARM Cortex™-A5, Cortex™-M4, 500 MHz (A5), 167 MHz (M4)
- Memory: 256 MB RAM, 512 MB FLASH
- Other remarks:
- Watchdog output 24 V DC
- Watchdog output 24 V DC
Mounting rail bus connector HBUS 161.6
License to use BACnet/SC
DIGICONTROL ems5 expansion license for CAN bus module license for an extension module. The license is required from 13th extension module on.
DIGICONTROL ems5 extension license for CAN fieldbus modules, such as ems4.DEA2I or R4D.RCxx. License for an expansion module. The license is required from the 13th expansion module.
DIGICONTROL ems5 expansion license of ems5 for the embedded Modbus RTU Master interface via the integrated RS232-/RS485-interface
DIGICONTROL ems5 expansion license for load management load group with 8 loads
DIGICONTROL ems5 extension license for a secure VPN communication. Furthermore as Smart Building Connector for the communication with the DIGICONTROL - Smart Building as a Service or as BACnet-IP-Gateway for the connection of further BACnet components.
DIGICONTROL ems5 expansion license for email dispatch from automation stations
Expansion license for integrated BACnet Modbus interface
Extension license for optimizing energy efficiency in HVAC systems
available upon request
ROOM4D mounting variation distribution boards DIGICONTROL R4D.UV
Small plastic distribution boards for hollow wall installation in accordance with DIN VDE 0603/1 and DIN 43 871. For installing devices up to 63 A with 70 mm installation depths in compliance with measurement standard DIN 43 880, measurement voltage 400 V/50 Hz, protection class IP30, degree of protection class II insulated.
Dimensions (WxHxD): 348 x 505 x 94.5 mm
ROOM4D mounting variation small distributor DIGICONTROL R4D.DV
Small distributor, single-row, 14 subunits, Ui=400 V, screw-less PE/N terminal strip, flexible cable inlay at the top, with cover and label strips, additional double seal cable glands.
Dimensions (WxHxD): 300 x 300 x 142 mm
ROOM4D mounting variation terminal board DIGICONTROL R4D.FV
Terminal board, manufactured using 1mm galvanised steel plate, tight-fitting M25 cable entry grommets with puncture membrane, cover with quick release fastener, protection class IP40.
Dimensions (WxHxD): 500 x 350 x 80 mm
